Polyurethane finish coating(paint)--BXpu FINISH SC

A weather resisting and self-cleaning polyurethane enamel for exterior surface of steel structure and buildings. paint

Characteristics

Excellent appearance, weather-resisting and resistance stick dust.

Good resistance to impact, abrasion.

Quick drying.

Good high-build application.

Production information

Color: White and other colours

Mixing ratio: Base/Hardener=10/1(by wt.)

Volume solids: 48% (white)

Specific gravity:1.22 (white)

Flashing point: Greater than 29°C

Film thickness: Dry : 30-60um/coat      Wet: 63-126um/coat

Spreading rate: Theoretical: 0.076kg/m2/30um (white)

             Practical: depending on surface conditions, environment,                        application, etc.

Storage: -5°C-40°C, 1 year

 

Application data

Application methods: Airless spray, air spray, brush and roller

                     Airless spray              Recommended

                     Nozzle tip                 0.021-0.023

                     Fluid pressure             100-150kg/cm2

                        Thinning ratio              0-50% by volume

                        Application temp.           -5°C-40°C

 

Surface Preparation

Remove salt and other water-soluble contaminations by fresh water hosing.

Degrease according to SSPC-SPI solvent cleaning.

Remove weld spatter and smooth weld seams and sharp edges.

Remove rust,mail-scale and damaged shop primer by blasting to ISO Sa2.5 (SSPC-SP10) or by power tooling to ISO St3.0.

Be sure that the surface is clean and dry prior to application.

 

Health & Safety

Before and during use, observe the safety labels on the container.Use under well ventilated conditions.Don't swallow, do not inhale mist, and avoid contact with skin and eyes. Follow all local or national safety regulations. Take precautions against possible risks of fire or explosions.For more detailed information on health and safety, Consult Binsense Safety data sheets.

Polyurethane finish coating(paint)--BXpu FINISH SC